Fibre-Shelkote Vinyl ester swimming pool resurfacing products and EastCoast Pools, Inc. proven professional 6 step swimming pool resurfacing process offers the strongest and longest lasting vinyl-ester resin surface in the swimming pool resurfacing / fiberglass pool resurfacing industry today!

Before East Coast Pools Professional 6 step Fibre-Shelkote Pool Resurfacing

After East Coast Pools Professional 6 step Fibre-Shelkote Pool Resurfacing

Our professional installation process sandwiches the fiberglass mat between three layers of pure vinyl ester resin. There is no color pigment or fillers in this process and that is what makes Fibre-Shelkote far superior to any other fiberglass pool resurfacing system available today.

Fibre-Shelkote can be applied to any structurally sound surface including fiberglass, concrete, concrete block, carbon, steel, marcite, wood and aluminum. The versatility of Fibre-Shelkote makes it ideal for indoor and outdoor applications. Whether your swimming pool is exposed to the harshest winter conditions or sweltering summer conditions found further south along the East Coast ~ Fibre-Shelkote can withstand even the the most extreme weather conditions.

EastCoast Pools, Inc. uses Fibre-Shelkote for the following resurfacing applications:

Swimming pools
Hot tubs
Spas
Fountains
Waterslides

Prior to our proven professional 6 step process the unit gets prepped by grinding the surface and installing seal lines for fiberglass termination. Any repairs (if needed) will be completed and the unit will be washed.

Now it’s time to install the Fibre Shelkote liner system:

Step one: Fibre-Shelkote cleercoate is applied to entire surface penetrating and sealing off tiny pores in the surface, this will ensure proper bonding of fiberglass.

Step two: we now apply Fibre-Shelkote pure vinyl ester resin (this coat contains no color pigment or fillers).

Step three: heavy fiberglass mat (1.5 oz.) is hand laid while the resin coat is still damp.

Step four: Fibre-Shelkote pure vinyl ester resin (this coat contains no color pigment or fillers) is applied over the top of fiberglass and air release rollers are used to contour and smooth the fiberglass.

Step five: the surface is hand sanded to remove any blemishes, all seal lines are installed and the first coat of gel coat (not colored polyester resin) is applied.

Step six: the final coat of gel coat is applied and now you have a true non-porous surface that will be a 100% water tight membrane for years to come. At this time swim lanes, wall targets, step highlight and custom logos will be applied.